- Pet gate that keeps your furry friend contained or blocks her from areas of your home.
- Measures 24 inches in height and expands to fit openings between 26 and 38 inches.
- Requires no assembly and attaches to your walls with pressure mounts.
- Made with an all-metal frame that is durable, lead-free, non-toxic and chew-proof.
- Features a small door to let smaller animals pass through while keeping everyone else out.
Protect your home and keep your furry friend safe with the Carlson Pet Products Tuffy Expandable Gate with Pet Door. It measures 24 inches in height and expands to fit openings between 26 and 38 inches. This gate attaches to your walls with pressure mounts and features an all-metal frame for durability. It also includes a small door to let smaller animals pass through while keeping everyone else out. Keep your paw-tner contained with the Carlson Pet Products Tuffy Expandable Gate with Pet Door.
Item Number | 69452 |
---|---|
Dimensions | 26 x 25 x 2.5 inches |
Lifestage | Adult |
Breed Size | Small Breeds, Medium Breeds, Large Breeds, All Breeds |
Material | Stainless Steel, Metal |
Gate Type | Pressure Mounted |
Gate Feature | Pet Door |
Gate Width | 26 to 38 inches |
Bar Spacing | 2 inches |
(1) Carlson Tuffy Expandable Pet Gate, Instruction Manual, (4) rubber bumpers.
NOT recommended for use with children. Install according to manufacturer’s manufactures instructions. ALWAYS install and use [gate/enclosures] as directed using all required parts. STOP using when a child or pet can climb over or dislodge the gate. Use only with the locking/latching mechanism securely engaged. To prevent falls, NEVER use at top of stairs. NEVER use to keep child or pet away from pool. This is a Pet Gate, but when used with children, the small pet door must remain closed and securely latched. Strangulation hazard: pets can force themselves into very small openings; use this gate with pets whose heads will not fit into openings in the gate, between the gate and floor, or between the gate and wall. NEVER leave child or pet unattended. Check the gate regularly to see if all the hardware and mountings are tightened. Do not use if any components are missing or damaged. Adult assembly required.
Periodically check the gate for signs of damage, wear, or missing components. Do not use if any part is missing, worn or damaged. Check the gate regularly to ensure all the hardware and mountings are tightened. Do not use abrasive cleaners or bleach. Clean by sponging with warm water and a mild detergent.
To set the gate, grab both sides and expand to the desire width, lift the locking pin, moving it into place and securing it in the open hole. Now just twist the plastic knob to adjust the pressure until the gate is safely secured against the wall.
- Place your expandable gate in an opening no smaller than 26 inches and no larger than 42 inches wide.
- With one hand on each side of the gate frame, pull away from the center until the gate spans the entire length of your doorway or opening.
- To lock the gate into position, pull up on the locking pin and slide the adjustment device towards the center of the gate.
- When the adjustment device can go no further, push down on the locking pinch The pin will insert into one of the holes on the horizontal bar and secure the adjustment device in place.
- Use the turning knob to tighten and secure the gate in place. Rotate the knob away from you (clockwise) until enough pressure is created to stabilize and secure your gate.
Reviews
There are no reviews yet.